LXE mx7 Verweisanleitung
Entering Data
37
E-EQ-MX7RG-H
MX7 Reference Guide
Using the Integrated Barcode Scanner or Imager
Use the integrated laser scanner to scan linear barcodes.
Use the 5380SF integrated imager to scan 2D barcodes.
Barcode Scanner
Read all cautions, warnings and labels before using the laser
scanner.
Do not look into the laser’s lens.
Do not stare directly into the laser beam.
To scan with the integrated laser barcode reader, point the scan aperture towards a barcode and
press the Scan button. You will see a red beam strike the barcode. Align the beam so that the
barcode is centered within the beam. The laser beam must cross the entire barcode. Move the
MX7 towards or away from the barcode so that the barcode takes up approximately two-thirds the
width of the beam.
press the Scan button. You will see a red beam strike the barcode. Align the beam so that the
barcode is centered within the beam. The laser beam must cross the entire barcode. Move the
MX7 towards or away from the barcode so that the barcode takes up approximately two-thirds the
width of the beam.
There may be a tactile response combined with the Scan functions.
Laser
Correct Scan
Incorrect Scan
Incorrect Scan
Figure 1-26 Laser Scanner Beam on Linear Barcode
2D Imager
Figure 1-27 Imager Bracketed Crosshair Target on 2D Barcode
To scan with the integrated imager, point the scan aperture towards a 2D barcode and press the
Scan button. You will see a bracketed crosshair strike the barcode. Align the brackets so that the
center of the barcode is covered by the crosshair.
Scan button. You will see a bracketed crosshair strike the barcode. Align the brackets so that the
center of the barcode is covered by the crosshair.
Move the MX7 towards or away from the barcode until a response is received by the MX7 (beep,
tactile response, etc) or the bracketed crosshair times out and disappears.
tactile response, etc) or the bracketed crosshair times out and disappears.