LXE mx7 Verweisanleitung

48 Hardware 

Configuration 

MX7 Reference Guide 

 

E-EQ-MX7RG-H 

The MX7 contains Bluetooth version 2.0 with Enhanced Data Rate (EDR) up to 3.0 Mbit/s over 
the air. Bluetooth device connection (or pairing) can occur at distances up to 32.8 ft (10 meters) 
Line of Sight. The wireless client retains network connectivity while Bluetooth is active.  

The user will not be able to select PIN authentication or encryption on connections from the MX7. 
However, the MX7 supports authentication requests from pairing devices. If a pairing device 
requests authentication or encryption, the MX7 displays a prompt for the PIN or passcode.  
Maximum encryption is 128 bit. Encryption is based on the length of the user’s passcode.  

 Bluetooth will simultaneously support one printer as a slave Bluetooth device and one scanner, 
either as a slave or as a master Bluetooth device. 

See Chapter 3 System Configuration, control panel section titled Bluetooth.  

• 

The MX7 does not have a Bluetooth managed LED. 

• 

The LED on the Bluetooth scanner illuminates during a scanning operation; the Scan LED 
on the MX7 does not illuminate.  

• 

Barcode data captured by the Bluetooth scanner is manipulated by the settings in the MX7 
Scanner Properties control panel applet.  

• 

Multiple beeps may be heard during a barcode scan using the Bluetooth scanner; beeps 
from the Bluetooth scanner as the barcode data is accepted/rejected, and other beeps from 
the MX7 during final barcode data manipulation.