LXE mx7 Verweisanleitung

Seite von 376
62 
Power Supply 
MX7 Reference Guide 
 
E-EQ-MX7RG-H 
Power Supply 
The MX7 computer is designed to work with a Lithium-Ion (Li-ion) battery from LXE. Under 
normal conditions it should last approximately eight to ten hours before requiring a recharge. The 
more you use the scanner or the wireless transmitter, the shorter the time required between battery 
recharges.  
A suspended MX7 maintains the date and time for a minimum of two days using a main battery 
that has reached the Low Warning point and a fully charged backup battery. The MX7 retains 
data, during a main battery hot swap, for at least 5 minutes. 
Note: 
New main battery packs must be charged prior to use. This process takes up to four 
hours in an LXE Multi-Charger and six hours when the MX7 is connected to external 
power.  
Checking Battery Status 
Tap the 
 | Settings | Control Panel | Power | Battery tab. Battery level, power status and 
charge remaining is displayed. Turbo setting is enabled/disabled using this applet. 
Note: 
Power drain increases substantially in Turbo mode. 
MX7 Status LED and the Batteries 
When the LED is . . . 
The Status is . . . 
Comment 
Blinking Red 
Power Fail 
Replace the main battery with a fully charged 
main battery. 
Or 
Connect the MX7 to external AC power then 
replace the main battery with a fully charged 
main battery. 
Steady Red 
Main Battery Low 
Low Battery Warning. Replace the main 
battery with a fully charged main battery. 
No Color 
Good 
No user intervention required. 
 
Main Battery Pack 
The main battery pack has a rugged plastic enclosure that is designed to withstand the ordinary 
rigors of an industrial environment. Exercise care when transporting the battery pack making sure 
it does not come in contact with excessive heat or any power source other than the LXE Multi-
Charger or the MX7 unit. 
When the main battery pack is properly installed in the unit it provides up to eight hours of 
operation depending upon use and accessories installed. The battery pack is resistant to impact 
damage and falls of up to four feet to a concrete surface. 
Under normal conditions it should last approximately eight hours before requiring a recharge. The 
more you use the scanner or the wireless transmitter, the shorter the time required between battery 
recharges.