LXE mx7 Verweisanleitung

Power Supply 

63 

E-EQ-MX7RG-H 

 

MX7 Reference Guide 

Important:  When the backup battery power is Low or Very Low (

Power | Battery tab) connect the AC adapter to the MX7 before replacing the main battery pack.  

When the main battery power level is low, the MX7 will signal the user with the low battery 
warning indicator (the Status LED remains a steady red) that continues until the main battery is 
replaced, the battery completely depletes, or external power is applied to the MX7 using an AC 
Adapter.  

You can replace the main battery by first placing the device in Suspend Mode then removing the 
discharged main battery and installing a charged main battery within a five minute time limit (or 
before the backup battery depletes).  

When the main battery is removed the device enters Critical Suspend state, the MX7 remains in 
Suspend mode, the display is turned off and the backup battery continues to power the unit for at 
least five minutes. Though data is retained, the MX7 cannot be used until a charged main battery 
pack is installed. After installing the new battery, press the Power key. Full operational recovery 
from Suspend can take several seconds while the client is reestablishing a network link. 

If the backup battery depletes before a fully charged main battery can be inserted, the MX7 will 
turn Off.  

Full operational recovery from Suspend can take several seconds while the  wireless client 
connects to the network, authorization for Voxware-enabled applications complete, Wavelink 
Avalanche management of the MX7 startup completes, and Bluetooth relationships establish or 
re-establish. 

It is recommended that the main battery pack be removed and replaced when its energy depletes. 
When the main battery Low Battery Warning appears (the Status LED remains a steady red) 
perform an orderly shut down, minimizing the operation of any installed devices and insuring any 
information is saved that should be saved.