LXE mx6 Verweisanleitung

 

E-EQ-MX6RG-E 

 

MX6 Reference Guide 

 

 

Charge the main battery pack and the internal backup battery completely. A main battery pack 
charge takes four hours and the backup battery charge takes 8 hours (new batteries only). 

The main battery can be charged in one of three ways –  

• 

either while in the MX6 in a powered docking cradle, or  

• 

by placing the main battery in a powered MX6 battery charger. 

• 

in-unit battery charging using the Communications cable with power supply. 

The sequence of events for a new MX6 is: 

1.  Insert a fully charged battery. (Always put a fully charged battery in the MX6 at the 

beginning of the shift or work day.) 

2.  Turn the MX6 on by pressing the Power key. 

3.  Align (calibrate) the touchscreen. 

4.  Complete the simple exercise showing how to use the stylus and pop-up menus. 

5.  Set the time zone for your location. Please wait while programs install. 

6.  When the Today screen is displayed, tap the Clock icon and set the correct date and time. 

7.  Set the wireless radio parameters, if necessary. Refer to “Setting Wireless Security”. 

8.  Edit the terminal emulation parameters, if necessary. Refer to the “RFTerm Reference 

Guide”. 

9.  Tap Start (or the 

 ) | Utils (or Power Tools) | RegBackup to permanently save your 

settings. 

If you remove the main battery or the main battery fails, there is a 30 minute window in which to 
insert a charged main battery before the backup battery fails and the contents of RAM are lost.