LXE mx6 Verweisanleitung

Power Key 

15 

E-EQ-MX6RG-E 

 

MX6 Reference Guide 

 

The Power key is located in the top left corner of the keypad. Press the Power key to 
turn the MX6 on, place it into Suspend or to wake it from Suspend modes.  

You can also use the Scan key (or trigger if installed) to wake the MX6 from 
Suspend. 

The MX6 DC power jack is located at the base of the MX6. The main battery recharges when the 
MX6 is connected to an external power source and the “Main Batteries are Charging” icon is 
displayed in the toolbar. 

 

 

Push the 17-pin power cable connector into the MX6 serial port.  

When the connector is seated over the pins, twist the cable fasteners to the right to secure the cable 
to the MX6.  

Twist to the left to loosen and remove the cable.  

Insert the barrel end of the AC/DC Power adapter into the short cable end on the power cord 
connected to the MX6.