LXE mx6 Verweisanleitung
Touch Screen
47
E-EQ-MX6RG-E
MX6 Reference Guide
Touch Screen
Figure 3-9 Touch Screen
The MX6 Touch Screen Display is a color LCD unit capable of supporting VGA graphics modes.
Display size is 320 x 240 pixels in portrait orientation. The display covering is designed to resist
stains. The touch screen allows signature capture and touch input. A pen stylus is included. The
touch screen responds to an actuation force (touch) of 4 oz. of pressure (or greater).
Display size is 320 x 240 pixels in portrait orientation. The display covering is designed to resist
stains. The touch screen allows signature capture and touch input. A pen stylus is included. The
touch screen responds to an actuation force (touch) of 4 oz. of pressure (or greater).
When the color LCD unit is in Suspend mode, the reflective 256 color display appears to have a
greenish hue.
greenish hue.
The display is automatically turned off when the MX6 enters the Suspend state.
Display Backlight Timer
When the Backlight timer expires the display backlight is turned off. The default value for the
battery power and AC timer is 30 seconds.
battery power and AC timer is 30 seconds.
When the display wakes up, the Backlight timers begin the countdown again.
Cleaning the Glass Display and Imager Aperture
Keep fingers and rough or sharp objects away from the scan aperture and display. If the glass
becomes soiled or smudged, clean only with a standard household cleaner such as Windex(R)
without vinegar or use Isopropyl Alcohol. Do not use paper towels or harsh-chemical-based
cleaning fluids since they may result in damage to the glass surface. Use a clean, damp, lint-free
cloth. Do not scrub optical surfaces. If possible, clean only those areas which are soiled.
Lint/particulates can be removed with clean, filtered canned air.
becomes soiled or smudged, clean only with a standard household cleaner such as Windex(R)
without vinegar or use Isopropyl Alcohol. Do not use paper towels or harsh-chemical-based
cleaning fluids since they may result in damage to the glass surface. Use a clean, damp, lint-free
cloth. Do not scrub optical surfaces. If possible, clean only those areas which are soiled.
Lint/particulates can be removed with clean, filtered canned air.