LXE mx6 Verweisanleitung

Seite von 338
Battery 
49 
E-EQ-MX6RG-E 
 
MX6 Reference Guide 
Battery 
The MX6 computer is designed to work with a rechargeable Lithium-Ion (Li-ion) battery from 
LXE. Under normal conditions it should last approximately eight to ten hours before requiring a 
recharge. The more you use the scanner or the RF transmitter, the shorter the time required 
between battery recharges. The MX6 keeps date and time valid for a minimum of four days using 
a fully charged backup battery and a main battery that has reached the Low Warning point. 
When the main battery has lost most of its charge, an icon of an “empty” or “half-empty” battery 
appears.  
The MX6 retains data, during a main battery hot swap, for at least 5 minutes.  
Note: 
New main battery packs must be charged prior to use. This process takes up to four 
hours in an LXE Multicharger and three hours when the MX6 is connected to external 
power through it's power jack.  
See Also: 
 
Appendix C “MX6 Multicharger”. 
Checking Battery Status 
Access: 
Start | Settings | System tab | Power 
 
Figure 3-10  Check Battery Status 
 
Important:  This symbol is placed on the product to remind users to dispose of Waste Electrical and 
Electronic Equipment (WEEE) appropriately, per Directive 2002-96-EC. In most areas, this product 
can be recycled, reclaimed and re-used when properly discarded. Do not discard labeled units with 
trash. For information about proper disposal, contact LXE through your local sales representative, or 
visit www lxe com.