LXE vx7 Verweisanleitung
PCMCIA, CF and SD Slots
71
E-EQ-VX7RG-H
VX7 Reference Guide
3.
Before completely inserting the radio, connect the Antenna Cable to the radio, using the
port(s) indicated below:
port(s) indicated below:
Note: Radio cards for single antenna units may have the unused antenna port covered
with tape.
The internal antenna is a dual (diversity) antenna.
Summit CF 802.11a/b/g Radio Card
The Summit 802.11a/b/g radio has four antenna ports, two ports are for the “a” portion of
the radio and two ports are for the “b/g” portion of the radio.
the radio and two ports are for the “b/g” portion of the radio.
CF radio is installed on a PCMCIA adapter. Hold the radio card with the antenna ports
facing down. Connect the antenna cable(s) as follows:
facing down. Connect the antenna cable(s) as follows:
•
Single antenna – Connect antenna cable to Main a port or the Main b/g port
depending on antenna type. Auxiliary port is not used.
depending on antenna type. Auxiliary port is not used.
•
Dual a antennas – Connect antenna cables to both Main a and Auxiliary a ports.
•
Dual antennas, one a antenna and one b/g antenna – Connect the a antenna cable
to the Main a port and connect the b/g antenna cable to the Main b/g port.
to the Main a port and connect the b/g antenna cable to the Main b/g port.
Auxiliary
b/g Port
Main
b/g Port
Auxiliary
a Port
a Port
Main
a Port
a Port
Figure 2-41 Summit 802.11 a/b/g Antenna Cable Connections