Manualsbrain.com
  1. Handbücher
  2. Marken
  3. LXE
  4. vx7
  5. Verweisanleitung

LXE vx7 Verweisanleitung

Download
Seite von 386
70 
PCMCIA, CF and SD Slots 
VX7 Reference Guide 
E-EQ-VX7RG-H 
Install PCMCIA Cards 
Equipment Needed: Phillips No. 1 screwdriver and a Torque wrench capable of measuring to 9±1 
inch pounds (1.016±.11 N/m). 
Note: 
The example below details installing a  radio card.  Installation of other PCMCIA cards 
is similar, except there is no antenna. 
The radio card is installed in slot A (the upper slot).  When a second PCMCIA card is present, 
such as a Bluetooth CF card via a PCMCIA adapter, the second card is installed in Slot B (the 
lower slot). 
Install the Type II PCMCIA Radio 
Caution
 
!
 
The LXE Model VX7 Vehicle Mount Computer is specifically for use with LXE 
Model 6726, 6816, 4830 and 4831  Type II PCMCIA radios. Substitution of 
other PCMCIA radios will void the FCC, Industry Canada and other 
international radio certifications for the Model VX7 Vehicle Mount Computer 
and is strictly prohibited. 
 
1. 
Turn the VX7 off and detach the power cable. 
2. 
Loosen the three (3) Phillips head screws securing the access panel cover so the cover can 
be removed.  The screws are a captive part of the cover and cannot be removed.  
Partially insert the Type II PCMCIA Radio into Slot A (the upper right slot).  
 
Caution
 
!
 
Slot A MUST BE used for the radio card.  Installing a radio card in Slot B can 
result in pinching or other damage to the internal antenna cable. 
 
SD
CF ATA
PCMCIA  A
PCMCIA  B
Radio Card
  
Figure 2-40  Inserting the Type II PCMCIA Radio 
Note: 
The tethered access panel cover is not shown in the illustration above.