LXE vx3plus Verweisanleitung
Bluetooth
25
E-EQ-VX3PLUSRG-A
VX3Plus Reference Guide
Bluetooth Barcode Reader Setup
Please refer to the Bluetooth scanner manufacturer’s User Guide; it may be available on the
manufacturer’s web site. Contact your LXE representative for Bluetooth product assistance.
manufacturer’s web site. Contact your LXE representative for Bluetooth product assistance.
Introduction
LXE supports several different types of barcode readers. This section describes the interaction and
setup for a mobile Bluetooth laser scanner or laser imager connected to the VX3Plus using
Bluetooth functions.
setup for a mobile Bluetooth laser scanner or laser imager connected to the VX3Plus using
Bluetooth functions.
• The VX3Plus must have the Bluetooth hardware and software installed. A VX3Plus
operating system upgrade may be required. Contact your LXE representative for details.
• If the VX3Plus has a Bluetooth address identifier barcode label affixed, then Bluetooth
hardware and software is installed.
• The mobile Bluetooth laser scanner / laser imager battery is fully charged.
• The barcode numbering examples in this segment are not real and should not be created
• The barcode numbering examples in this segment are not real and should not be created
nor scanned with a Bluetooth scanner.
• To open the LXEZ Pairing program, tap Start | Settings | Control Panel | Bluetooth or
tap the Bluetooth icon on the desktop or tap the Bluetooth icon in the taskbar.
LnkB00440fd01020 - Sample
Figure 1-10 Sample Bluetooth Address Barcode Label
Locate the barcode label, similar to the one shown above, attached to the mobile device. The label
is the Bluetooth address identifier for the VX3Plus.
is the Bluetooth address identifier for the VX3Plus.
The mobile Bluetooth scanner / imager requires this information before discovering, pairing,
connecting or disconnecting can occur.
connecting or disconnecting can occur.
Important: The VX3Plus Bluetooth address identifier label should remain protected from
damage (rips, tears, spills, soiling, erasure, etc.) at all times. It may be required when pairing,
connecting, and disconnecting new Bluetooth barcode readers.
damage (rips, tears, spills, soiling, erasure, etc.) at all times. It may be required when pairing,
connecting, and disconnecting new Bluetooth barcode readers.