LXE vx3plus Verweisanleitung
26
Bluetooth
VX3Plus Reference Guide
E-EQ-VX3PLUSRG-A
VX3Plus with Label
If the VX3Plus has a Bluetooth address barcode label attached, follow these steps:
1. Scan the Bluetooth address barcode label, attached to the VX3Plus, with the LXE Bluetooth
mobile scanner.
2. If this is the first time the Bluetooth scanner has scanned the VX3Plus Bluetooth label, the
devices are paired. See section titled “Bluetooth Beep and LED Indications”. If the devices do
not pair successfully, go to the next step.
not pair successfully, go to the next step.
3. Open the LXEZ Pairing panel [Start | Settings | Control Panel | Bluetooth].
4. Tap Discover. Locate the Bluetooth scanner in the Discovery panel.
5. Double tap the stylus on the Bluetooth scanner. The right-mouse-click menu appears.
6. Select Pair as Scanner to pair the VX3Plus with the Bluetooth mobile scanner.
The devices are paired. The Bluetooth barcode reader responds with a series of beeps and LED
flashes. Refer to the following section titled “Bluetooth Beep and LED Indications”.
flashes. Refer to the following section titled “Bluetooth Beep and LED Indications”.
Note:
After scanning the VX3Plus Bluetooth label, if there is no beep and no LED flash from
the Bluetooth device, the devices are currently paired.
the Bluetooth device, the devices are currently paired.