Muratec F-520 Netzwerkanleitungen

1-2

Connecting to a LAN

In order to use the network features you must connect your machine to your LAN 

and adjust the appropriate settings.
To connect the machine to the LAN, a 10BASE-T or 100BASE-TX LAN cable (Cat-

egory 5) is required.

NOTE: The LAN cable is not included with this product.

 

  Turn your machine off and unplug the power cord.

 

  Plug one end of the LAN cable into the LAN connector on the left side of the 

machine.

 

LINE

PHONE1

PHONE2

Illuminates when connected to the LAN.

10Base-T/100Base-TX cable
RJ-45 connector

Blinks when there is data trafic
on the LAN.

Connect to the Ethernet hub.

 

  Plug the other end of the LAN cable into the 10Base-T/100Base-TX Ethernet 

hub.

 

  Plug the power cord into the wall outlet and turn your machine on.