Muratec F-520 Netzwerkanleitungen

2-2

Network settings

This machine uses TCP/IP protocol to communicate over the LAN, meaning the 

TCP/IP settings described in this guide must be registered prior to using the 

machine on the LAN.

NOTE: Contact your network administrator if you are unsure about these settings.

IMPORTANT: In order to activate new settings, the machine must be rebooted after the new 

settings have been entered. Turn the machine “Off” and after three or more 

seconds, turn the machine back “On”.

 

  Press [Setting] on the control panel.

 

  Press [Management].

 

 

  Press [Network Settings].