Ricoh 2035e Benutzerhandbuch

Remote Maintenance by telnet

97

Use the "slp" command to configure
SLP settings.
You can search the NetWare server
using SLP in the PureIP environment
of NetWare5/5.1, 6. Use the "slp"
command to configure the value of
TTL used by the SLP multi-cast-pack-
et.

❒ The default value of TTL is “1”. A

search is executed only within a lo-
cal segment. If the router does not
support multi-cast, the settings are
not available even if the TTL value
is increased.

❒ The acceptable TTL value is 1 - 255.

Use the "sprint" command to view
and configure SCSI print (SBP-2) on
IEEE 1394.

❒ You can use this function when the

optional IEEE 1394 board is in-
stalled.

❖

❖

❖

❖ Viewing settings

The following command displays
the current IEEE 1394 (SCSI print)
settings:

❖

❖

❖

❖ Bidirectional configuration for IEEE

Use this setting to select whether
IEEE 1394 (SCSI print) is bidirectional
or not. The default is “on”.

Use the "wiconfig" command to con-
figure IEEE 802.11b settings.

❒ You can make settings when in-

stalling the optional 802.11b inter-
face kit.

❖

❖

❖

❖ View settings

The following command displays
the current IEEE 802.11b settings.

msh> wiconfig
The following command displays
the IEEE 802.11b card information.

❒ If the IEEE 802.11b interface is

not working correctly, the IEEE
802.11b card information is not
displayed.

❖

❖

❖

❖ Configuration

mode 
[ap|802.11adhoc|
adhoc]

You can set infra-
structure mode 
(ap), 802.11 ad hoc 
mode 
(802.11adhoc), or 
ad hoc mode (ad-
hoc).

The default is 
802.11 ad hoc 
mode.