Ricoh 2035e Benutzerhandbuch

Remote Maintenance by telnet

99

❒ When changing the interface to

IEEE 802.11b, see p.90 “TCP/IP
address”.

❒ When configuring the IEEE

802.11b TCP/IP, see p.90 “TCP/IP
address”.

Use the "spoolsw" command to con-
figure Job Spool settings.

❒ You can only specify LPR, IPP, and

SMB protocol.

❒ This information cannot reload au-

tomatically when you confirm Job
S p o o l   s e t t i n g s   w i t h  t h e   W e b
browser. Click [Reload] or [Refresh]
on the Web browser when you
want to reload this information.

❖

❖

❖

❖ Reference

The Job Spool setting appears.

❖

❖

❖

❖ Job Spool setting

❒ Select [on] to enable Job Spool or

 to disable it.

❖

❖

❖

❖ Protocol configuration

To change protocol settings, use
the following command. You can
specify the setting for "lpr", "ipp"
or "smb".
• lpr

• ipp

• smb

Use the "hostname" command to
change the printer name.

*1

If you did not enter the interface

name, it will be automatically set to

the Ethernet interface.

*2

Available when the optional 802.11b

interface kit is installed.

*3

Available when the optional 1394 in-

terface board is installed.

❒ Enter the printer name using up to

15 characters.

❒ You cannot use a printer name

starting with "RNP" or "rnp".

❒ The Ethernet interface and IEEE

802.11b interface will have the
same printer name.

Use the "wins" command to configure
WINS server settings.

❖

❖

❖

❖ Viewing setting

The following command displays
the WINS server IP address:

msh> wins
Example output:

ether

Ethernet interface 

wlan  

IEEE 802.11b interface

ip1394 

IEEE 1394 interface