Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Ricoh
  4. 2035e
  5. Benutzerhandbuch

Ricoh 2035e Benutzerhandbuch

Download
Seite von 1044
Polling Transmission
11
1
r You can set whether a Polling
Transmission file is deleted after
transmitting in User Parameters.
To save the file to transmit repeat-
edly, set to “Standby (Save)”. See
p.159 “User Parameters” (switch
11, bit 7).
r Polling Transmission Clear Report
allows you to verify Polling Trans-
mission has taken place. See p.12
“Polling Transmission Clear Re-
port”. If E-mail TX Results is pro-
grammed in a Quick Operation
key, you can select whether a re-
port e-mail is sent after transmis-
sion. The destination of this report
can be selected from the e-mail ad-
dresses in the destination list.
r You can program one of the Quick
Operation keys with operations for
this function. Using the key allows
you to omit steps 
B and C.
r The communication fee is charged
to the receiver.
r This function is not available with
Internet Fax transmission.
A
Place the original, and then select
the scan settings you require. 
Reference
B
Press 
[
Transmission Mode
]
.
C
Press 
[
Polling TX
]
.
D
Depending on the Polling Trans-
mission mode, use one of the fol-
lowing procedures:
Free Polling Transmission
A Check that 
[
Free Polling TX
]
 is se-
lected.
Default ID Transmission
A Select 
[
Default ID TX
]
.
ID Override Transmission
A Select 
[
ID Override Transmission
]
.
B Specify a 4-digit ID using the
number keys and 
[
A
]
, 
[
B
]
, 
[
C
]
,
[D
]
, 
[
E
]
, and 
[
F
]
.
Note
r A Polling ID may be any four
numbers (0 to 9) and charac-
ters (A to F), except 0000 and
FFFF.
r If you make a mistake, press
[
Clear
]
 or the {Clear/Stop} key,
and then try again.