Ricoh 2035e Benutzerhandbuch

More Transmission Functions

77

If you run out of memory while stor-
ing an original (free space reaches
0%), the message “

Memory is full.

Cannot scan more.

 

Transmission

will be stopped.

” is displayed.

Press 

 to transmit stored pages

only.

r In default, scanned pages are sent.

To change the settings to delete
scanned pages, contact your ser-
vice representative.

This function dials while the original
is being scanned. Standard Memory
Transmission stores the original in
memory, then dials the destination.
Parallel Memory Transmission al-
lo w s   y o u   t o  q u i c k l y  d e t er m i n e
whether a connection was made. In
addition, this function scans the orig-
inal faster than Immediate Transmis-
sion. This is useful when you are in a
hurry and need to use the original for
another purpose.

r Standard Memory Transmission is

used instead of Parallel Memory
Transmission in the following cas-
es:
• When the line is busy and could

not be connected to

• With  Send  Later

• When you store an original for

Memory Transmission while
another communication is in
progress

• When two or more destinations

are specified

• When you send only an Auto

Document

• When the first page of an origi-

nal is placed on the exposure
glass

• When you send messages

stored in the Document Server

r You can turn this function on or off

with the User Parameters. See
p.159 “User Parameters” (switch
07, bit 2).

r Standard Memory Transmission

may be used instead of Parallel
Memory Transmission depending
on the optional equipment in-
stalled if there is not enough free
memory left.

r If you use this function, the Memo-

ry Storage Report will not be print-
ed.

r If the {Clear/Stop} key is pressed,

an original will jam or memory
will run out during Parallel Mem-
ory Transmission stops. The Trans-
mission Result Report is printed
and files are deleted.

r When Parallel Memory Transmis-

sion is used, the total number of
originals in “Fax Header Print” is
not automatically printed.