Ricoh 2035e Benutzerhandbuch
More Transmission Functions
79
4
Dual Access
The machine can scan other messages
into memory even while sending a
fax message from memory, receiving
a message into memory, or automati-
cally printing a report. Since the ma-
chine starts sending the second
message immediately after the cur-
rent transmission ends, the line is
used efficiently.
into memory even while sending a
fax message from memory, receiving
a message into memory, or automati-
cally printing a report. Since the ma-
chine starts sending the second
message immediately after the cur-
rent transmission ends, the line is
used efficiently.
Note
r Note that during Immediate
Transmission or when in User
Tools mode, the machine cannot
scan an original.
Tools mode, the machine cannot
scan an original.
Transmission with Image
Rotation
Rotation
Generally, place A4, 8
1
/
2
"
×
11" origi-
nals in the landscape orientation (L).
If you place an A4, 8
If you place an A4, 8
1
/
2
"
×
11" original
in the portrait orientation (K), the
image will be sent rotated by 90
image will be sent rotated by 90
°
. Pro-
viding the receiver has A4, 8
1
/
2
"
×
11"
landscape paper (L), the message
will be printed the same size as the
original.
will be printed the same size as the
original.
Note
r This function is unavailable with
Immediate Transmission.
r When Image Rotation is used, all
messages are sent by normal Mem-
ory Transmission.
ory Transmission.
r This function is unavailable when
using Mixed Original Sizes.
Simultaneous Broadcast
The optional extra G3 interface unit is re-
quired.
quired.
The Standard Broadcast function
sends faxes one at a time to multiple
destinations in the order of specified
destinations.
The Simultaneous Broadcast func-
tion, however, can simultaneously
send faxes to three destinations using
different lines.
This results in a shorter overall trans-
mission time.
sends faxes one at a time to multiple
destinations in the order of specified
destinations.
The Simultaneous Broadcast func-
tion, however, can simultaneously
send faxes to three destinations using
different lines.
This results in a shorter overall trans-
mission time.
Note
r This function can use a maximum
of three lines simultaneously.
r When using the optional extra G3
interface unit, if you set the line se-
lection as “G3 Auto” beforehand,
the machine will use whichever G3
line is not busy. This increases effi-
ciency.
lection as “G3 Auto” beforehand,
the machine will use whichever G3
line is not busy. This increases effi-
ciency.