Ricoh 2035e Benutzerhandbuch
Simplifying the Operation
128
7
Using a Program
Note
r Using the program causes the pre-
vious settings to be cleared.
Example of executing a program
using Send Later with the fax
number “0123456789”
using Send Later with the fax
number “0123456789”
A
Make sure that the machine is in
facsimile mode and the standby
display is shown.
facsimile mode and the standby
display is shown.
Note
r If the standby display is not
shown, press the {Facsimile}
key.
key.
B
Place the original.
Note
r If you have no programmed
destinations or scan settings as
programs, enter the fax number
of the destination and select the
scan settings you require.
programs, enter the fax number
of the destination and select the
scan settings you require.
C
Press the {Program} key.
D
Select the program number you
registered.
registered.
The standby display appears.
Then, the programmed fax num-
ber is shown. Transmission Mode
is selected.
ber is shown. Transmission Mode
is selected.
E
Press the {Start} key.
The fax number and specified time
are shown on the display, and the
machine starts to scan the original.
Transmission will start at the spec-
ified time.
The fax number and specified time
are shown on the display, and the
machine starts to scan the original.
Transmission will start at the spec-
ified time.