Ricoh fax3900l Betriebsanweisung
ISDN G3/G4
113
7
❖
Programming I-G3 SPID (I-G3 Own
Number 2)
Number 2)
When you have two units connect-
ed to the same line, enter the I-G3
SPID number.
If "ISDN Directory Number Select
(SPID)" in the User Parameters is
turned off, the display shows "I-G3
Own Number 2" instead of "I-G3
SPID". These settings are identical.
ed to the same line, enter the I-G3
SPID number.
If "ISDN Directory Number Select
(SPID)" in the User Parameters is
turned off, the display shows "I-G3
Own Number 2" instead of "I-G3
SPID". These settings are identical.
❖
Programming the I-G3 Sub-address
When multiple terminals (faxes,
digital phones, and so on) are con-
nected to the same line, program a
sub-address for each terminal.
digital phones, and so on) are con-
nected to the same line, program a
sub-address for each terminal.
Note
❒ You can enter up to 4 digits.
❒ You can enter numbers from 0
❒ You can enter numbers from 0
to 9999.
Storing ISDN Telephone
Numbers
Numbers
You must be careful to select the correct
signaling type (Group 3 or Group 4) when
dialing, or when storing a telephone
number as a Quick Dial or Speed Dial.
To register G4 sub-address informa-
tion, perform the following procedure.
signaling type (Group 3 or Group 4) when
dialing, or when storing a telephone
number as a Quick Dial or Speed Dial.
To register G4 sub-address informa-
tion, perform the following procedure.
A
Make sure that the machine is in
standby mode.
standby mode.
B
Press the {
User Tools
} key.
C
Press 0 or 1 to display "4. Key
Op. Tools".
Op. Tools".
User Tools Main Menu
4.Key Op. Tools hi
D
Press the {
OK
} key.
E
Press {
2
}{
2
}{
2
}{
2
}, and then
press the {
OK
} key.
F
Press 0 or 1 to display "17.
ISDN G3 / G4".
ISDN G3 / G4".
Key Op. Tools:
17.ISDN G3/G4 hi
G
Press the {
OK
} key.
To register G4 Terminal ID
A Confirm that "1. G4 Terminal
ID" is displayed.
ISDN G3/G4:
1.G4 Terminal ID hi
B Press the {
OK
} key.
C Enter your country code.
If you make a mistake, press the
{
Clear
} key and try again.
CountryCode:Press OK
[0000]
D Press the {
OK
} key.
E Enter the fax number.
If you make a mistake, press the
{
Clear
} key and try again.
Fax Number: Press OK
[012345678901]
F Press the {
OK
} key.
G Enter the name.
If you make a mistake, press the
{
Clear
} key and try again.
Name:[ABC] OK
[ABC COMPANY_kkkkkk]
H Press the {
OK
} key.
G4 sub-address information is
registered.
registered.
Smt4EN-Ad-F_FM.book Page 113 Monday, September 18, 2000 11:17 AM