Ricoh CL5000 Installationsanleitung
Options
34
1
IIII
Turn over the cables, and then
connect them to the slots on the
controller board.
connect them to the slots on the
controller board.
JJJJ
Adjust the controller board to the
top and bottom rails, and then
push in slowly until it stops.
top and bottom rails, and then
push in slowly until it stops.
Note
❒ When installing other options
on the controller board, do not
close the controller board, but
go to the steps for installing the
option.
close the controller board, but
go to the steps for installing the
option.
Important
❒ The printer may not work prop-
erly if the controller board is not
set properly.
set properly.
KKKK
Tighten the two screws that you
removed in step
removed in step
to fasten the
controller board back into its
original position.
original position.
Use a coin to fasten it securely.
LLLL
Set the dustproof filter cartridge
that you removed in step
that you removed in step
.
Important
❒ Do not shake the removed car-
tridge. It may cause dust to fall
off.
off.
ZESP119J
ZESHK764J
ZESHK752J
ZESHK761J