Nikon S2 Benutzerhandbuch

11

First Steps

4

 Close the memory card slot cover/battery-chamber cover

Close the cover (

) and slide it in the direction shown until it latches ()

Before they can be used in the COOLPIX S2, memory cards must be formatted using the 
Format card option in the camera setup menu (

 79).

Memory cards can be removed without loss of data when the 
camera is off.  To remove memory cards, turn the camera off 
and confi rm that the power-on lamp is off.  Do not open 
the memory card slot/battery-chamber cover while the 
power-on lamp is lit.  Open the memory card slot/battery-
chamber cover and press the card in to partially eject the card.  
The card can then be removed by hand.

Direction of 

insertion

Terminals

Check to be sure the card is in the correct orienta-
tion.  Inserting the card upside down or backwards 
could damage the camera or the card.

Before inserting the card, make sure that it is un-
locked.  If the card is locked, pictures can not be 
recorded, deleted, or edited and the card can not 
be formatted.

Lock 

switch

3

 Insert the memory card

Slide the memory card in terminals fi rst until it clicks into place.