Frigidaire gleq642as2 Anleitung Für Quick Setup

OPERATING INSTRUCTIONS

Printed in U.S.A.

Read Drying Procedures in your Owner's Guide.
It explains these operating steps in detail.

 1. Prepare items for drying.

Operating Steps

P/N 134066300 (0107)

Versión en español

Si desea obtener una copia en español de estas
Instrucciones de Funcionamiento, sírvase escribir a la
dirección que se incluye a continuación.
Solicite la P/N 131972200.

Spanish Owner's Guides
Electrolux Home Products
P. O. Box 212378
Augusta, Georgia  30917

The

 REGULAR-HIGH HEAT, PERM PRESS-MEDIUM

HEAT, and KNITS/DELICATES-LOW HEAT temperature
settings may be used with any cycle setting. The 

AIR

FLUFF-NO HEAT setting can be used only in the Timed
Dry cycle.

AIR FLUFF-NO HEAT setting tumbles the load without
heat. Use Air Fluff to freshen clothing, pillows or
blankets, or to dust draperies.

Cycle Selection

Turn cycle selector clockwise to desired cycle and
setting.

Each cycle ends with a cool down period. The heat
automatically turns off and the load continues to tumble
during the cool down period. This reduces wrinkling and
makes items easier to handle during unloading.

Drying time varies depending on size and dampness of
load, weight and fabric type. Room temperature and
humidity, type of installation and electrical voltage or
gas pressure can also affect drying time.

2. Check that lint screen is clean and in place.

3. Load the dryer. If desired, add a dryer fabric

softener sheet.

4. Close the dryer door.

5. Set Dry Temperature control.  Select PRESS

SAVER  if desired.

6. Turn cycle selector clockwise to desired

setting.

7. Start dryer. Push the Start button and hold for 1-

2 seconds, or turn the Turn to Start control
clockwise to ON. Hold for 1-2 seconds and release.

8. A signal will sound toward the end of the cool

down period when the End of Cycle chime is

turned on.

9. Remove items immediately and hang or fold.

10. Clean lint screen after every load.

Temperature Selection

Always follow directions on fabric care

labels.

 To avoid fire hazard, do not use heat

to dry items containing feathers or down, foam rubber,
plastics, or similarly textured, rubber-like materials.
Use Air Fluff-No Heat setting only.

Before Operating Your Dryer

Read your dryer Owner's Guide. It has important
safety and warranty information. It also has many
suggestions for best drying results.

  To reduce the risk of fire, electric

shock, or injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS in your dryer owner's guide
before operating this appliance.