Frigidaire feb30t7dcb Benutzeranleitung

Note: The time of day must first be set in order to operate the oven.

When the range is first plugged in, or when the power supply to the appliance has been interrupted, the display will flash "12:00"
and PF (power failure) appears in the display.
1.

Press the CLOCK pad once (do not hold pad down).

2.

Within 5 seconds, press and hold the UP or DOWN ARROW pad until the correct time of day appears in the display.

3.

Press the START pad to accept the change, if the pad is not touched the change will be accepted after 5 seconds.

Note: The clock cannot be changed during any timed bake or self-clean cycle.

1.

Press and hold the CLOCK pad for 6 seconds. After 6 seconds, "12Hr" or "24Hr" will appear in the display and the control
will beep once.

2.

Press the UP or DOWN ARROW pad to switch between the 12 and 24 hour time of day display. The display will show either
"12Hr" or "24Hr".

3.

Wait 5 seconds or press the START pad to accept the changes and return to the time of day display.

4.

Reset the correct time as described in To set the Clock above. Please note that if the 24 hour time of day mode was chosen,
the clock will now display time from 0:00 through 23:59 hours.

1.

Press the TIMER ON/OFF pad.

2.

Press the UP ARROW pad to increase the time in 5 second increments. Press and hold the UP ARROW pad to increase the
time faster. The timer can be set for any amount of time from 5 seconds to 11 hours and 50 minutes.

3.

The display shows the timer countdown in seconds when you set the minute timer for less than 59 minutes. When the minute
timer is set for more than 1 hour the display shows the timer countdown in minutes.

4.

When the set time has run out, the timer will beep until the TIMER ON/OFF pad is pressed.

Note: The minute timer does not start or stop cooking. It serves as an extra timer in the kitchen that will beep when the set
time has run out. The minute timer can be used alone or during any of the other oven functions. When the minute timer is in use
with any other mode, the other mode countdown will be shown in the display. To view the minute timer count down, press the
TIMER ON/OFF pad.

To Change the Minute Timer while it is in use:
While the timer is active and shows in the display, press the TIMER ON/OFF pad and hold the UP or DOWN ARROW pad to increase
or decrease the time.

To Cancel the Minute Timer before the set time has run out: Press the TIMER ON/OFF pad twice and press the CLEAR/OFF
pad to return to time of day display.