Frigidaire FGEF306TMF Betriebsanweisung

29

Prior to using your cooktop for the 

fi rst time, apply the recommended 

CERAMA BRYTE® Cleaning Creme to 

the ceramic surface. Clean and buff 

with a non abrasive cloth or pad. This 

will make cleaning easier when soiled 

from cooking. The special cooktop 

cleaning cream leaves a protective 

fi nish on the glass to help prevent 

scratches and abrasions.

Sliding aluminum or copper clad 

bottom pans on the cooktop can 

cause metal markings on the cooktop surface. These 

marks should be removed immediately after the 

cooktop has cooled using the cooktop cleaning cream. 

Metal marks can become permanent if not removed prior 

to future use.

Cookware (cast iron, metal, ceramic or glass) with rough 

bottoms can mark or scratch the cooktop surface. Do 

not slide anything metal or glass across the cooktop. 

Do not use your cooktop as a cutting board or work 

surface in the kitchen. Do not cook foods directly on the 

cooktop surface without a pan. Do not drop heavy or 

hard objects on the glass cooktop, or they may crack it.

Apply a few drops of CookTop® Cleaning Creme directly 

to the cooktop. Use a paper towel or use a non-

abrasive plastic type no-scratch pad to clean the 

entire cooktop surface. Make sure the cooktop is cleaned 

thoroughly, leaving no residue.

Apply a few drops of CookTop® Cleaning Creme directly 

to the soiled area. Rub the soiled area using a non-

abrasive plastic type no-scratch pad, applying pressure 

as needed. Do not use the pad you use to clean the 

cooktop for any other purpose.

DO NOT use a cooktop cleaner on a hot cooktop. 

The fumes can be hazardous to your health, and can 

chemically damage the ceramic glass surface.

Before cleaning the cooktop, be sure the controls are 

turned to OFF and the cooktop is COOL.

Damage to the ceramic glass cooktop may occur if you 

use an abrasive type scratch pad. Only use cleaning 

products that have been specifi cally designed for 

ceramic glass cooktop.

If soils remain, carefully scrape soils with a metal razor 

blade scraper, holding scraper at a 30 degree angle to the 

surface. Remove loosened soils, then apply a few drops 

of cleaning cream and buff surface clean.