Frigidaire gles388dsb Betriebsanweisung

The TIMER ON/OFF 

 pad controls the Timer feature. The Timer serves as an extra timer in the kitchen that will beep

when the set time has run out.  It does not start or stop cooking.  The Timer feature can be used during any of the other oven
control functions. Refer to “Minumum and Maximum Control Pad Settings” on page 1 for time amount settings.

Figure 1

Figure 2

Figure 3

Figure 4

Figure 5

Figure 6

Figure 7

1.

Press 

. "0:00" will appear and "TIMER" will flash in the

display (Figure 5).

2.

Press the number pads to set the desired time in the display

(example 

).  Press 

. The time will begin to count down

with "5:00" and "TIMER" will stay in the display (Figure 6).

Note: If 

 is not pressed the timer will return to the time of

day.

3.

When the set time has run out, "End" and "TIMER" will show in
the display (Figure 7). The clock will sound with 3 beeps every 15

seconds until 

 is pressed.

Press 

.  The display will return to the time of day.

 

The TIMER ON/OFF 

 and CLEAN 

 pads control the Continuous Bake or 12 Hour Energy Saving features. The oven

control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the oven if the oven control is left on for
more than 11 hours and 59 minutes. The oven can be programmed to override this feature for Continuous Baking.

1.

Press and hold 

 for 7 seconds (Figure1). "12Hr" or

"- -Hr" will appear in the display and the control will beep once.

2.

Press 

 to switch between the 12 Hour Energy Saving and

continuous bake features. Note: "12Hr" in the display indicates
the control is set for the 12 Hour Energy Saving mode and
"- -Hr" indicates the control is set for the Continuous Bake feature
(Figures 2 and 3).

3.

Press 

 to accept the change (Figure 4; display will return to

time of day) or Press 

 to reject the change.