Frigidaire FPEF4085KF Betriebsanweisung

16

The delaY start and selF clean pads control 

the Silent Control operation feature. The Silent Control 

operation feature allows the oven control to be operated 

without sounds or beeps whenever necessary. If desired 

the control can be programmed for silent operation and 

later returned to operating with all the normal sounds 

and beeps.
To change control from normal sound operation to
silent control operation

1.  To tell if your range is set for normal or silent 

operation press and hold delaY start for 7 

seconds. “-- --” will appear and “delaY” will flash in 

the display. After 7 seconds “sP” or “- -” will appear 

in the display.

2.  Press selF clean to switch between normal sound 

operation and silent operation mode. The display will 

show either “sP” or “- -”. Note: If “sP” appears, the 

control will operate with normal sounds and beeps. 

If “- -” appears, the control is in the silent operation 

mode.

3.  Press start to accept the change or press cancel 

to reject the change.

note: The control will always beep at the end of a 

minute timer and will beep when a set temperature 

has been reached, even if the control is set to silent 

operation.

The BROIL and selF clean pads control the 

Fahrenheit or Celsius temperature display modes. The 

oven control can be programmed to display temperatures 

in Fahrenheit or Celsius. The oven has been preset at the 

factory to display in Fahrenheit.
To change display from Fahrenheit to Celsius or
celsius to Fahrenheit

1.  To tell if the display is set for Fahrenheit or Celsius 

press BROIL and hold it for 7 seconds; “550°” will 

appear and “BROIL” will flash in the display and a 

beep will sound. If “F” appears, the display is set to 

show temperatures in Fahrenheit. If “c” appears, the 

display is set to show temperatures in Celsius.

2.  Press selF clean to switch between Fahrenheit or 

Celsius display modes. The display will show either 

“F” or “c”.

3.  Press start to accept the change or press cancel 

to reject the change.

The timer on.oFF pad controls the Minute Timer 

feature. The Minute Timer serves as an extra timer in 

the kitchen that will beep when the set time has run 

out. It does not start or stop cooking. The Minute Timer 

feature can be used during any of the other oven control 

functions. Refer to “Minimum and Maximum Control Pad 

Settings” for time amount settings.
to set the minute timer (example for 5 minutes)
1.  Press timer on.oFF. “-- --” will appear and 

“timer” will flash in the display.

2.  Press the number pads to set the desired time in the 

display. 

3.  Press start. The time will begin to count down with 

“5:00” and “timer” will stay in the display. Note: 

If start is not pressed the timer will return to the 

time of day after 25 seconds.

4.  When the set time has run out, “end” and “timer” 

will show in the display. The clock will sound with 

3 beeps every 5 seconds until timer on.oFF is 

pressed.

1.  Press timer on.oFF. The display will return to the 

time of day.

The 

 pad controls the Lockout feature. The Lockout 

feature automatically locks the oven door and prevents 

the oven from being turned ON. It does not disable the 

clock, Minute Timer or the interior oven lights.

1.  Press and hold 

 for 3 seconds.

2.  After 3 seconds a beep will sound, “loc” will appear 

and “door locked” will flash in the display. 

Once the oven door is locked the “door locked” 

indicator will stop flashing.

1.  Press and hold 

 for 3 seconds. A beep will 

sound. “loc” will disappear. The “door locked” 

will flash in the display until the oven door has 

completely unlocked.

2.  The oven is again fully operational.