Intel SC5650BCDP Benutzerhandbuch
Intel
®
Server System SC5650BCDP TPS
Cooling Sub-System
Revision 1.5
Intel order number: E80367-002
31
Figure 12. Cooling Fan Configuration for Intel
®
Server Board S5500BC
The Intel
®
Server System SC5650BCDP is engineered to provide sufficient cooling for all
internal components of the server. The cooling subsystem is dependent upon proper airflow.
The designated cooling vents on both the front and back of the chassis must be left open and
must not be blocked by improperly installed devices. All internal cables must be routed in a
manner that does not impede airflow, and ducting provided for CPU cooling must be installed.
The designated cooling vents on both the front and back of the chassis must be left open and
must not be blocked by improperly installed devices. All internal cables must be routed in a
manner that does not impede airflow, and ducting provided for CPU cooling must be installed.
Active heatsinks for CPUs incorporate a fan to provide cooling. The Intel
®
Server System
SC5650BCDP is engineered to work with processors that have an active heatsink solution.
Heatsink thermal solutions are sold separately, be sure that you use one that is rated for the
wattage of your processor. Proper installation of the processor cooling solution is required for
circulating air toward the rear of the chassis (toward I/O connectors).
Heatsink thermal solutions are sold separately, be sure that you use one that is rated for the
wattage of your processor. Proper installation of the processor cooling solution is required for
circulating air toward the rear of the chassis (toward I/O connectors).
4.3.1
System Fan Connectors
The Intel
®
Server System SC5650BCDP supports three system fans. The Intel
®
Server Board
S5500BC supports five SSI compliant 4-pin fan connectors. The two 4-pin fan connectors are
for processor cooling fans: CPU_1 fan (J3K1) and CPU_2 fan (J7K2). The three 4-pin fan
connectors are for system fans system fan 1(J3K2), system fan 2(J8K3), and system fan 3
(J8B4).
for processor cooling fans: CPU_1 fan (J3K1) and CPU_2 fan (J7K2). The three 4-pin fan
connectors are for system fans system fan 1(J3K2), system fan 2(J8K3), and system fan 3
(J8B4).
Fan
Connect to fan connector
Rear Chassis Fan
System Fan 3
HDD Bay Fan
System Fan 2
PCI Zone fan
System Fan 1