Sima wx-268 Benutzerhandbuch

 PRESS SAVE

3.  SET LOCATION 01 will be displayed on the screen.

Press the NEXT (>) key.

4.  SELECT STATE will be displayed on the screen.Turn the

FUNCTION knob clockwise until you locate the desired
state. Press the NEXT(>) key.

5.  SELECT COUNTY will be displayed on the screen. Turn

the FUNCTION knob until you locate the desired county.
Press the NEXT (>) key.

6. SELECT SUBDIVISION will be displayed on the screen.

Turn the FUNCTION knob to scroll through the
subdivisions within a county. For ex.  1- NorthEast

Note: Setting the subdivision to 0 - ANY  will receive all
 alerts broadcast in the entire county.
7.  Press the NEXT (>) key when you have selected the

subdivision of your county .

8.  Press the SAVE key to save your SAME location and

return to normal operation.

NOTE: Because broadcast areas overlap you may want to set more than one S.A.M.E.
location. To set more than one S.A.M.E. location, you must complete the above steps for
each location desired. Repeat steps 1 and 2 above. Upon entering the SETUP
LOCATIONS menu in step 3, turn the FUNCTION knob to select an alternate location,
press the NEXT (>) key and proceed as prompted through step 8.

SELECT SUBDIVISION

NOAA sends out test signals weekly and monthly to verify that your Public Alert radio
is working properly.  Your radio is programmed at the factory to block the alert siren
for the  test signals.  When the test signal is received:
1.  The LCD screen will display the text message
     “The National Weather Service has issued a required weekly or monthly test for

2.  If not blocked, the radio will beep for 15 sec.  The siren will not sound.
3.  Weekly and monthly tests are stored in the Alert Queue.

Note: If the WX-268 has not received a test signal or an alert for a period of 10 days, it

will automatically alert you by displaying 10 DAY ALERT SENTRY on the LCD
screen.

SELECT STATE

SELECT COUNTY

SETUP LOCATION 01