Ergodex dx1 Betriebsanweisung
54
Care of the DX1 Input System
Like any electronic device, the Ergodex DX1 Input System should be
handled with care. Please observed the following guidelines:
Protect the DX1 from extremes in temperature. Don’t leave your
system in a car where it could be subjected to very high or low
temperatures. High temperatures can shorten the life of electronic
devices. Do not store parts or accessories in hot areas.
When electronic equipment, such as the DX1 Input System, has
been stored in a colder area and moved to a relatively warmer area,
moisture can form inside the equipment. As electronic equipment
warms up to its normal operating temperature, this moisture may
damage electronic circuit boards. Do not store parts or accessories
in cold areas.
handled with care. Please observed the following guidelines:
Protect the DX1 from extremes in temperature. Don’t leave your
system in a car where it could be subjected to very high or low
temperatures. High temperatures can shorten the life of electronic
devices. Do not store parts or accessories in hot areas.
When electronic equipment, such as the DX1 Input System, has
been stored in a colder area and moved to a relatively warmer area,
moisture can form inside the equipment. As electronic equipment
warms up to its normal operating temperature, this moisture may
damage electronic circuit boards. Do not store parts or accessories
in cold areas.
Protect the DX1 Input System from temperature extremes.
Precipitation, humidity, and liquids contain minerals that will corrode
electronic circuits. Keep all parts and accessories dry.
Allowing dust or dirt to get into moving parts can cause damage. Do
not use or store parts or accessories in dusty, dirty areas.
Only qualified personnel may repair the DX1 Input System. There
are no user serviceable parts in the DX1 Input System. Do not
attempt to open. Non-expert handling may cause damage, will void
all product warranties, and will likely cause your DX1 Input System to
fail. Tampering with or removing the label on the back of the DX1
Pad will void all product warranties and will likely cause your DX1
Input System to malfunction.
Maintenance of the DX1 Input System
Cleaning the Pad
You may clean your Pad with a damp cloth, but NEVER submerge it
in water or allow liquids to spill on it. Do not use harsh chemicals,
cleaning solvents, or strong detergents to clean parts or accessories.
in water or allow liquids to spill on it. Do not use harsh chemicals,
cleaning solvents, or strong detergents to clean parts or accessories.
Clean the Pad with a damp cloth.
Cleaning the Key Tray
Always remove the Key Tray from the Pad for cleaning. The Key
Tray may be cleaned with warm soapy water. Always remove any
attached Keys before cleaning the Key Tray.
Tray may be cleaned with warm soapy water. Always remove any
attached Keys before cleaning the Key Tray.
Cleaning the Keys
The Keys, like the Pad, should be protected from temperature
extremes. The Keys should NEVER be submerged in liquid. The
adhesive surfaces of the Key bottoms may pick up dirt with repeated
use and become less sticky. To restore the Key adhesive, wipe with
a damp cotton swab or paper towel and let dry.
extremes. The Keys should NEVER be submerged in liquid. The
adhesive surfaces of the Key bottoms may pick up dirt with repeated
use and become less sticky. To restore the Key adhesive, wipe with
a damp cotton swab or paper towel and let dry.
Restore Key adhesive by wiping with water and allowing to dry.
Care & Maintenance