Citel 6000 Betriebsanweisung
PBXgateway
™
& EXTender
TM
6000 System Administrator’s Guide
78
Telnet/FTP Set up (Gateway and Remote)
The PBXgateway can be configured through a Telnet session and files can be saved or
retrieved through an FTP session.
Telnet
By default, Telnet is Enabled. Disabling it will prevent anyone from accessing the unit through
Telnet.
FTP
By default, FTP is disabled. Disabling it will prevent anyone from saving files to or retrieving files
from the unit through FTP. This is normally done to upgrade the unit’s software.
retrieved through an FTP session.
Telnet
By default, Telnet is Enabled. Disabling it will prevent anyone from accessing the unit through
Telnet.
FTP
By default, FTP is disabled. Disabling it will prevent anyone from saving files to or retrieving files
from the unit through FTP. This is normally done to upgrade the unit’s software.
Enabling/Disabling Telnet
1. Access the IP Menu from the Main Menu using the following path:
Path: ->Configuration->IP
The following menu appears:
Figure 33: Telnet/FTP
2. Press
the
→ and ↓ key to the Telnet parameter. Toggle the Telnet parameter between Enabled and
Disabled.
3. Press
the
← key to go accept changes and go back to the Configuration Menu
4. Press
the
↓ key to the Save option.
5. Press
Enter to save changes to the active config (.swt or .rmt) file.