Citel 6000 Guia Do Utilizador

 

PBXgateway

™ 

& EXTender

TM

 

6000 System Administrator’s Guide

 

78

 

The PBXgateway can be configured through a Telnet session and files can be saved or 
retrieved through an FTP session. 
 
Telnet 
By default, Telnet is Enabled. Disabling it will prevent anyone from accessing the unit through 
Telnet. 
 
FTP 
By default, FTP is disabled. Disabling it will prevent anyone from saving files to or retrieving files 
from the unit through FTP. This is normally done to upgrade the unit’s software. 
  

1.  Access the IP Menu from the Main Menu using the following path: 

 
Path: ->Configuration->IP 
The following menu appears: 

 

Figure 33:  Telnet/FTP 

2. Press 

the 

→ and ↓ key to the Telnet parameter.  Toggle the Telnet parameter between Enabled and 

Disabled. 

 
3. Press 

the 

← key to go accept changes and go back to the Configuration Menu 

 
4. Press 

the 

↓ key to the Save option.  

 
5. Press 

Enter to save changes to the active config (.swt or .rmt) file.