Calflame bbq07877p Benutzeranleitung
Appendix
2007 Pizza Oven Owner’s Manual
Page 11
LTR20071039, Rev. A
Problem: Plugged orifice
Solution: Unplug the orifice as follows:
Solution: Unplug the orifice as follows:
Remove rack, bricks and drip pan.
Remove burner from the bottom of the firebox by removing the screw in the back and lifting out
Remove burner from the bottom of the firebox by removing the screw in the back and lifting out
the burner.
Remove the orifice from the control valve.
Gently clear any obstruction with a fine wire.
Reinstall the orifice and the burner.
Replace rack, bricks and drip pan.
Remove the orifice from the control valve.
Gently clear any obstruction with a fine wire.
Reinstall the orifice and the burner.
Replace rack, bricks and drip pan.
If an obstruction is suspected in the control valve, contact your local Cal Flame dealer for
assistance.
•
•
•
•
•
•
•
•
•
•
Problem: Flashback
Solution: When fire occurs in and around the burner tubes, immediately turn off gas at its source and turn the
Solution: When fire occurs in and around the burner tubes, immediately turn off gas at its source and turn the
control knob(s) clockwise to the ‘OFF’ position. Wait until the pizza oven has cooled off and then
clean the burner tubes and burners as described in this manual.
Replacement Cover
We recommend covering your pizza oven to protect it from the elements. You may order a cover for your pizza
oven through your dealer or by calling 1-800-CAL-SPAS. The part number for the 22” pizza oven cover is
BBQ878CVR.