Panasonic ag-3da1 Benutzerhandbuch

Seite von 96
3
Basic shooting operations (continued)
SD Memory Card recording times
Total available recording times (approx.) when 
using SDHC Memory Cards manufactured by 
Panasonic
SDHC Memory 
Card capacity
Recording mode PH
(190 × 1080 pixels or  
180 × 70 pixels)
4 GB
Approx.  1 min
8 GB
Approx.  45 min
16 GB
Approx.  90 min
3 GB
Approx. 180 min
This product allows PH recording mode only.
The quality of AVCCAM recording modes are 
PH>HA>HG>HE in the order of high to low 
quality.
Use an SD Memory Card of SD speed class 4 
or above. Recording cannot be completed on 
SD Memory Cards of lower speed classes.
This camera uses the VBR recording system. 
“VBR” stands for Variable Bit Rate, and it refers to 
a system in which the bit rate (volume of data per 
given time period) varies automatically depending 
on the subject which is being shot. This means 
that the recording times will be shorter when fast-
moving subjects have been recorded.
Times displayed include time needed for 
processing, etc. – actual available recording times 
will be slightly shorter.
Repeatedly recording or deleting images over 
and over again may reduce the recording time 
on the SD Memory Card. In such cases, format 
the SD Memory Card using the camera. When 
a card is formatted, all of its recorded data 
will be erased, and it will not be subsequently 
possible to restore this data. Save any valuable 
data on your PC prior to formatting.

SD Memory Card access lamps
Each SD Memory Card access lamp indicates 
the status of the SD Memory Card inserted in the 
corresponding SD card slot.
Illuminated:
Reading/writing possible
Flashing (fast):
Verifying card/inspecting card for possible 
defects
Flashing (slow): Accessing card
Off:  No card inserted/unformatted, incompatible 
card inserted or card full
SD Memory Card access lamps