Panasonic AG-HVX200 Betriebsanweisung
Editing
77
1394
1394
USB 2.0
Computer (non-linear editing/file transfer)
Hard disk drive (data copying)
• For details on the computer’s conditions and other factors, see page 82.
Hard disk drive
Computer
USB cable (optional)
• For a Windows computer
• For a Windows computer
1394 cable (optional)
• For an Apple Macintosh computer
• For an Apple Macintosh computer
1394 cable (optional)
Mini-B type
4-pin type
File transfer/nonlinear editing
1394AVC transfer/nonlinear editing
1394
Computer (Windows/Apple Macintosh)
1394 cable (optional)
4-pin type
4-pin type
• When controlling this camera from a non-linear editor, cancel the thumbnail screen on the camera.
• No guarantees are given for images and audio signals which are output simultaneously from the camera-
recorder while data is being transferred from a computer to the camera-recorder.
When connecting the unit to an Apple Macintosh computer
• Connect the 1394 cable after turning on the power of the Apple Macintosh computer. Otherwise, the unit
• Connect the 1394 cable after turning on the power of the Apple Macintosh computer. Otherwise, the unit
may not be mounted.
• The unit may not be recognized after the Apple Macintosh computer has been placed in the hibernation
state by its power-saving setting. In this case, disconnect the 1394 cable and then re-connect it.
If the unit is not mounted properly on an Apple Macintosh computer
• When the P2 card access lamp flashes orange
1.
• When the P2 card access lamp flashes orange
1.
Select [Applications] → [Utilities] → and start up [Disc Utility].
2.
Select a grayed-out volume among volumes of the X.X GB Panasonic disc, and click “Mount.”
• When the P2 card access lamp is off
Eject the P2 card, and insert it again. If the unit is still not mounted, disconnect the 1394 cable and then
Eject the P2 card, and insert it again. If the unit is still not mounted, disconnect the 1394 cable and then
re-connect it.