Panasonic AG-HVX200 Betriebsanweisung

1 

2 

1394

• Before proceeding to connect or disconnect 1394 cable, be absolutely sure to turn off the power of the 

units.

• Before proceeding to connect the unit which uses a 6-pin type 1394 connector, 

carefully check the shape of the 1394 cable and the connectors on the 1394 
cable. Connecting a connector upside down may damage the parts inside the 
unit and cause malfunctioning. Furthermore, connect the 1394 cable to the unit 
which uses a 6-pin type 1394 connector first. (

 →  )

• When recording signals from an external unit, first check that video signals are 

supplied.

• While signals from an external unit are being recorded, do not stop output on 

the external unit side or disconnect any of cables. This may lead to a failure to 
recognize the signals when you do recording again.

• Do not apply force when connecting 1394 cable to 1394 connector as this may damage the connector.
• No guarantees are made for the playback images when signals from an external device are recorded. 

(Video check level)

• The automatic recording function in the DVD unit may not function properly. In a case like this, proceed 

with the recording manually.

• Before proceeding to connect or disconnect 1394 cable, be absolutely sure to turn off the power of the 

units.

connector, carefully check the shape of the 1394 cable and the connectors 
on the 1394 cable. Connecting a connector upside down may damage the 
parts inside the unit and cause malfunctioning. Furthermore, connect the 
1394 cable to the unit which uses a 6-pin type 1394 connector first. (  → 

• Do not apply force when connecting 1394 cable to 1394 connector as this may 

damage the connector.

• When connecting to a PC, attach the ferrite core (provided) to the 1394 cable 

in such a way that the whole ferrite core fits within about 5 cm from the PC’s 
connectors. After threading the cable as shown in the figure on the right, close 
the ferrite core until it clicks into place and locks.