Panasonic AG-HPX500 Betriebsanweisung
117
Viewfinder and LCD Menus
C
h
ap
te
r 7 M
en
u O
p
p
er
at
io
n
s
4
Use the JOG dial button (or the Up and
Down cursor buttons) to highlight the
item you want to change.
Down cursor buttons) to highlight the
item you want to change.
HIGH GAIN
W.BAL.PRESET
USER MAIN
SPOTLIGHT
USER1
USER2
MID GAIN
SLOTSEL
6dB
12dB
3.2K
GAIN:18dB
PUSH MENU TO RETURN
SW MODE
5
Use the JOG dial button (or the SET
button) to change the setting value.
button) to change the setting value.
HIGH GAIN
W.BAL.PRESET
USER MAIN
USER1
USER2
MID GAIN
SLOTSEL
6dB
12dB
3.2K
GAIN:18dB
PUSH MENU TO RETURN
SW MODE
5.6K
6
To change other settings, repeat steps
4 and 5.
4 and 5.
• When you finish, press the MENU button to
return to the function screen.
7
To change other functions, repeat steps
2 to 5.
2 to 5.
• To exit the function screen and return to the
normal screen, press the MENU button again.
<Note>
Direct close function
When the MENU button is pressed and held down after
making a menu setting closes the setting menu screen
without first returning to the previous setting menu.
Direct close function
When the MENU button is pressed and held down after
making a menu setting closes the setting menu screen
without first returning to the previous setting menu.
Initializing the menu
settings
settings
The menu settings contain both the user file settings
and the scene file settings. You can initialize them
separately.
and the scene file settings. You can initialize them
separately.
To initialize the user file (i.e. all the
settings other than the scene file
settings)
settings other than the scene file
settings)
Select INITIAL in USER FILE of the OTHER
FUNCTIONS screen. The current menu settings of
user file will return to the factory settings.
FUNCTIONS screen. The current menu settings of
user file will return to the factory settings.
To initialize the scene file
From the 6 scene files, select the one you want
to initialize with the SCENE FILE dial. Then in the
SCENE FILE screen, LOAD/SAVE/INIT, select
INITIAL.
The settings for only the selected scene file are
returned to the factory settings.
• This does not effect the other scene files.
to initialize with the SCENE FILE dial. Then in the
SCENE FILE screen, LOAD/SAVE/INIT, select
INITIAL.
The settings for only the selected scene file are
returned to the factory settings.
• This does not effect the other scene files.