Panasonic AJ-HPX2000 Benutzerhandbuch
104
Preparation
：Preparing for Audio Input
Take the following steps to prepare the camera for connecting audio input devices.
AJ-HPX2000 can be equipped with the AJ-MC900G stereo
microphone kit (an extra-cost option).
microphone kit (an extra-cost option).
1
Open the microphone holder.
2
Mount the microphone and tighten the clamping
screw. The microphone must be attached with the UP
mark on the microphone facing up.
screw. The microphone must be attached with the UP
mark on the microphone facing up.
3
Connect the microphone cable to the MIC IN jack on
the camera.
the camera.
4
Set the AUDIO IN switch to [FRONT] depending on
the audio channel to be recorded.
the audio channel to be recorded.
1
Remove the cover to insert the wireless receiver and
secure it with the screws.
secure it with the screws.
2
Set the AUDIO IN switch to [W.L.] depending on the
audio channel to be recorded.
audio channel to be recorded.
Preparing for Audio Input
When Using the Front Microphone
Clamping Screw
MIC IN Jack
AUDIO IN
Switch
Switch
When Using a Wireless Receiver
When Using the Unislot Wireless Receiver
AJ-HPX2000P(VQT1D27-1)E.book 104 ページ ２００７年７月３０日 月曜日 午後１時３１分