Panasonic AJ-HPX2000 Benutzerhandbuch

105

Preparation

：Mounting the Camera on a Tripod

 P

repa

ra

ti

o

n

Connect the audio device to the AUDIO IN jack with 
the XLR cable. 

Set the AUDIO IN switch to [REAR] for the channel to 
which the XLR cable is connected. 

Set the LINE/MIC/+48V selector switch on the rear 
panel to [LINE]. 

When mounting the camera on a tripod, use the tripod adapter supplied with the camera. 

Mount the tripod adapter on the tripod. 

‹

Select an appropriate hole in the adapter, taking into 
account the center of gravity of the camera and tripod 
adapter combined. 
Also, make sure that the diameter of the selected hole 
matches the diameter of the pan head screw. 

Mount the camera on the tripod adapter. 
Slide the camera forward along the grooves until you 
hear a “click”. 

While holding the red lever down, move the black lever in
the direction of the arrow, and slide the camera backward
to remove it. 

‹

If the tripod adapter pin does not return to its original
position after the camera has been removed, hold the red
lever down and move the black lever in the direction of the
arrow again, in order to return the pin to its original
position. 
Please note that the camera cannot be mounted if the pin
remains in the center. 

When Using Audio Devices

Mounting the Camera on a Tripod

Removing the Camera from the Tripod Adapter

AJ-HPX2000P(VQT1D27-1)E.book  105 ページ  ２００７年７月３０日　月曜日　午後１時３１分