Panasonic NV-GS150 Benutzerhandbuch
Before using
16
LSQT0861
Using the viewfinder
ª
Extending the viewfinder
1
Pull out the viewfinder and extend it by
pulling the extension knob.
pulling the extension knob.
ª
Adjusting the field of view
1
Adjust the focus by sliding the eyepiece
corrector knob.
corrector knob.
≥You can adjust the brightness of the viewfinder
from the menu.
Power supply
ª
Charging the battery
When this product is purchased, the battery is not
charged. Charge the battery before using this
product.
≥Battery charging time (
charged. Charge the battery before using this
product.
≥Battery charging time (
)
≥We recommend using Panasonic batteries.
≥If you use other batteries, we cannot guarantee
≥If you use other batteries, we cannot guarantee
the quality of this product.
≥If the DC input lead is connected to the AC
adaptor, then the battery will not charge.
Remove the DC input lead from the AC adaptor.
Remove the DC input lead from the AC adaptor.
1
Connect the AC cable to the AC adaptor and
the AC jack.
the AC jack.
2
Put the battery on the battery mount by
aligning the mark, and then securely plug it
in.
aligning the mark, and then securely plug it
in.
ª
Charging lamp
Lights up: Charging
Goes off: Charging completed
Flashing: The battery is over discharged
Goes off: Charging completed
Flashing: The battery is over discharged
(discharged excessively). In a while,
the lamp will light up and normal
charging will start.
When the battery temperature is
excessively high or low, the [CHARGE]
lamp flashes and the charging time will
be longer than normal.
the lamp will light up and normal
charging will start.
When the battery temperature is
excessively high or low, the [CHARGE]
lamp flashes and the charging time will
be longer than normal.
ª
Connecting to the AC outlet
1
Connect the AC cable to the AC adaptor and
the AC jack.
the AC jack.
2
Connect the DC cable to the AC adaptor.
3
Connect the DC cable to this product.
≥The output plug of the AC cable is not
≥The output plug of the AC cable is not
completely connected to the AC adaptor jack.
As shown in
As shown in
1, there is a gap.
≥Do not use the power cord for other
equipment since the power cord is exclusively
designed for this Camcorder. Do not use the
power cord from other equipment for this
Camcorder.
designed for this Camcorder. Do not use the
power cord from other equipment for this
Camcorder.
ª
Fitting the battery
Push the battery against the battery holder and
slide it until it clicks.
slide it until it clicks.
12:30:45PM
OCT 15 2005
OCT 15 2005
12:30:45PM
OCT 15 2005
OCT 15 2005
12:30:45PM
OCT 15 2005
OCT 15 2005
12:30:45PM
OCT 15 2005
1
LSQT0861Eng.book 16 ページ ２００４年１２月２２日 水曜日 午後２時３４分