Panasonic NV-GS150 Benutzerhandbuch

Before using

LSQT0861

ª

≥Close the cassette cover completely, and then 

open it again completely.

≥Check if the battery has run down.
ª

≥Set the [OFF/ON] switch to [OFF], then to [ON] 

again.

≥Check if the battery has run down.
ª

≥When the cassette holder is in motion, do not 

touch anything except the [PUSH] mark.

≥When inserting a previously recorded cassette, 

use the blank search function to find the position 
where you want to continue recording. If you 
overwrite-record on a previously recorded 
cassette, be sure to find the position where you 
want to continue recording.

≥Close the cassette cover tightly.
≥When closing the cassette cover, do not get 

anything, such as a cable, caught in the cover.

ª

If the accidental erasure prevention slider 

1 of a 

cassette is opened (slide in the direction of the 
[SAVE] arrow), the cassette cannot be recorded. 
When recording, close the accidental erasure 
prevention slider of the cassette (slide in the 
direction of the [REC] arrow).

Before inserting/removing a card, be sure to turn 
the power [OFF].
≥If the card is inserted or removed with the power 

turned on, this Camcorder may malfunction or 
the data recorded on the card may be lost.

 

≥When inserting a card, face the label side 1 

towards you and push it straight in with one 
stroke as far as it goes.

≥When removing the card, open the card slot 

cover and press the center of the card and 
then pull it straight out.

ª

≥Do not touch the terminals on the back of the 

card.

≥Do not format the card with another Camcorder 

or any personal computer. This operation may 
make the card unusable.

≥Electrical noise, static electricity, or failure of the 

Camcorder or the card may damage or erase 
the data stored on the card. We recommend 
saving important data on a personal computer 
by using a USB cable, PC card adaptor, or USB 
reader/writer.

R E C

SAVE

1

1

LSQT0861Eng.book  18 ページ  ２００４年１２月２２日　水曜日　午後２時３４分