Panasonic SDR-S100 Betriebsanweisung
101
VQT0T50
Problem
Check points
The scenes are not
correctly displayed in
thumbnails.
correctly displayed in
thumbnails.
≥ Scenes displayed as
thumbnails in shades of blue
and white cannot be played
back or deleted. If the scenes
are unnecessary, format the
SD card to erase the data.
and white cannot be played
back or deleted. If the scenes
are unnecessary, format the
SD card to erase the data.
≥ Please be aware that if an SD
card is formatted, then all the data recorded on the card
will be erased. Store important data on a PC, etc. When
saving scenes recorded using this unit to a PC, you
must use MotionSD STUDIO. (P73)
will be erased. Store important data on a PC, etc. When
saving scenes recorded using this unit to a PC, you
must use MotionSD STUDIO. (P73)
“PUSH THE RESET
SWITCH.” is displayed.
SWITCH.” is displayed.
≥ The unit has automatically
detected an error. To protect the
data, remove the SD card and then
press the [RESET] button with the
projecting part
data, remove the SD card and then
press the [RESET] button with the
projecting part
1 of the hand
strap. This will restart the unit.
When you press the [RESET]
button, the date and time setting
will also be reset. Set the date and
time again.
When you press the [RESET]
button, the date and time setting
will also be reset. Set the date and
time again.
≥ Even after you press the [RESET] button, the indication
may still appear repeatedly. If so, this unit needs repair.
Detach the power connected, and consult the dealer
who you purchased this unit from. Do not attempt to
repair the appliance by yourself.
Detach the power connected, and consult the dealer
who you purchased this unit from. Do not attempt to
repair the appliance by yourself.
Even if connected by the
USB cable, this unit is
not recognized by the
PC.
USB cable, this unit is
not recognized by the
PC.
≥ Have you installed the Web camera driver?
> Install the driver, then check the connections.
≥ Have you set this unit to the correct mode?
> The unit is not recognized if it is set to motion picture
playback mode. (P80)
≥ Select another USB terminal on the PC.
≥ Check the operating environment. (P75, 76)
≥ Turn on the power to this unit.
≥ Check the operating environment. (P75, 76)
≥ Turn on the power to this unit.
When the USB cable is
disconnected, an error
message will appear on PC.
disconnected, an error
message will appear on PC.
≥
To disconnect the USB cable safely, double-click the
icon in the task tray and follow the instructions
on the screen.
The warning/alarm
indication [
indication [
°] appears
when this unit is
operated in the WEB
camera mode.
operated in the WEB
camera mode.
≥ Did you press the record button or any other button?
> You cannot record onto the card in the WEB camera mode.
≥ Have you installed the Web camera driver?
> Install the driver, then check the connections.
The [
] indication
flashes when this unit is
connected to a PC.
connected to a PC.
≥ The unit is connected to a Windows XP PC in still
picture playback mode.
> Connect with a printer supporting PictBridge.
> Connect with a printer supporting PictBridge.
The [
] indication
appears when the unit is
connected to the printer.
connected to the printer.
≥ The unit is connected to the printer in motion picture
recording mode or still picture recording mode.
> Change the mode to still picture playback mode.
> Change the mode to still picture playback mode.
1/3
1/3
SETUP
PLAY
1
PictBridge
WEB
VQT0T50_PP_ENG.book 101 ページ 2005年8月31日 水曜日 午後2時25分