WatchGuard x1000 Verweisanleitung

Seite von 264
Policy Manager
Reference Guide
215
Configure interfaces in Drop-in mode
Enable this checkbox to configure the Firebox in Drop-in mode. 
The Interface dialog box changes to allow only one IP address and 
Default Gateway. This is because in a Drop-in configuration  the 
Firebox is put in place with the same network address on all 
Firebox interfaces. 
Advanced Drop-In tab 
Automatic
Enable this checkbox to make proxy ARP automatic for the related 
hosts listed below.
Proxy ARP for hosts on the following network
Select the network, Trusted, Optional, or External, you want to 
use proxy ARP.
Related Hosts
A list of related hosts that use proxy ARP.
Add
Enter the host IP address, select the interface, and click Add to 
add a related host to the Related Host list. 
Remove
Select a host IP address from the Relates Host list and click 
Remove to delete a releated host.
Advanced DHCP tab
DHCP Initialization Timeout
Enter the duration in seconds the Management Station waits for a 
response from the DHCP server. The Firebox receives the IP 
address, gateway, and netmaks from the DHCP server managed 
by your Internet Service Provider (ISP).
DHCP Device Name
Enter the host name that is used during the DHCP exchange.
DHCP Lease Time
Enter the amount of time in Days, h (hours), and m (minutes) 
before the Firebox will renegotiate the DHCP lease.