WatchGuard x1000 Verweisanleitung
CHAPTER 10: Field Definitions
216
WatchGuard Firebox System
Enable DHCP dedbugging
Enable this check to allow DHCP debugging. DHCP debugging
generates large amounts of data. Do not enable DHCP debugging
unless you are having connection problems and need help from
Technical Support.
generates large amounts of data. Do not enable DHCP debugging
unless you are having connection problems and need help from
Technical Support.
Advanced PPPoE tab
PPPoE Initialization Timeout
Enter the duration in seconds the Management Station waits for a
response from the PPPoE server. The Firebox receives the IP
address, gateway, and netmaks from the PPPoE server managed
by your Internet Service Provider (ISP).
response from the PPPoE server. The Firebox receives the IP
address, gateway, and netmaks from the PPPoE server managed
by your Internet Service Provider (ISP).
LCP Echo Timeout
Enter the LCP Echo timeout in mileseconds.
LCP Echo Failure
Enter the LCP Echo failure rate in number of tries.
Service Name
Enter the Service name of the PPPoe server.
Access Concentrator Name
Enter the Access Concentrator name for the PPPoE server.
Enable PPPoE debugging
PPPoE debugging generates large amounts of data. Do not enable
PPPoE debugging unless you are having connection problems and
need help from Technical Support.
PPPoE debugging unless you are having connection problems and
need help from Technical Support.
Secondary Networks tab
Secondary Networks
A list of secondary networks on the interface you specify in the
drop down menu
drop down menu
IP Address
Enter the IP address of the secondary network you want to add to
the interface you specify in the drop down menu.
the interface you specify in the drop down menu.
Trusted (drop down menu selection)
Select to view or add the secondary networks on the Trusted
interface.
interface.