Manualsbrain.com
  1. Handbücher
  2. Marken
  3. 3com
  4. S7906E
  5. Installationsanweisungen

3com S7906E Installationsanweisungen

Download
Seite von 2621
 
1-6 
 
The peer group to be configured with a description must have been created. 
 
Disabling Session Establishment to an IPv6 Peer/Peer Group 
Follow these steps to disable session establishment to a peer/peer group: 
To do… 
Use the command… 
Remarks 
Enter system view 
system-view 
— 
Enter BGP view 
bgp as-number 
— 
Enter IPv6 address family view 
ipv6-family 
— 
Disable session establishment to an 
IPv6 peer/peer group 
peer { ipv6-group-name | 
ipv6-address } ignore 
Optional 
Not disabled by default 
 
Logging IPv6 Peer/Peer Group State Changes 
Follow these steps to configure to log on the session and event information of an IPv6 peer/peer group: 
To do… 
Use the command… 
Remarks 
Enter system view 
system-view 
— 
Enter BGP view 
bgp as-number 
— 
Enable logging of peer changes 
globally 
log-peer-change 
Optional 
Enabled by default. 
Enter IPv6 address family view 
ipv6-family 
— 
Enable the state change 
logging for an IPv6 peer or peer 
group 
peer { ipv6-group-name | 
ipv6-address } log-change 
Optional 
Enabled by default. 
 
 
Refer to BGP Commands in the IP Routing Volume for information about the log-peer-change 
command. 
 
Controlling Route Distribution and Reception 
The task includes routing information filtering, routing policy application and route dampening. 
Prerequisites 
Before configuring this task, you need to: