3com S7906E Verweisanleitung
1-25
Description
Use the display bgp multicast routing-table different-origin-as command to display IPv4 MBGP
routes originating from different autonomous systems.
Examples
# Display IPv4 MBGP routes originating from different autonomous systems.
<Sysname> display bgp multicast routing-table different-origin-as
BGP Local router ID is 2.2.2.2
Status codes: * - valid, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
Network NextHop MED LocPrf PrefVal Path/Ogn
*> 55.0.0.0 12.1.1.1 0 0 100?
* 14.1.1.2 0 0 300?
Refer to
for description on the fields above.
display bgp multicast routing-table flap-info
Syntax
display bgp multicast routing-table flap-info [ regular-expression as-regular-expression |
as-path-acl as-path-acl-number | ip-address [ { mask | mask-length } [ longer-match ] ] ]
View
Any view
Default Level
2: Monitor level
Parameters
as-regular-expression: Displays route flap information that matches the AS path regular expression.
as-path-acl-number: Displays route flap information matching the AS path ACL. The number is in the
range 1 to 256.
ip-address: Destination IP address.
mask: Mask, in dotted decimal notation.
mask-length: Mask length, in the range 0 to 32.
longer-match: Matches the longest prefix.
Description
Use the display bgp multicast routing-table flap-info command to display IPv4 MBGP route flap
statistics. If no parameter is specified, this command displays all IPv4 MBGP route flap statistics.
Examples
# Display IPv4 MBGP route flap statistics.