Xerox C118 Betriebsanweisung
4 UNIX TCP/IP
42
Xerox CopyCentre/WorkCentre 118 System Administration Guide
6.
Use the same steps as IP address setting to enter the subnet mask and gateway
address.
address.
NOTE: You can enter 000, 128, 192, 224, 240, 248, 252, 254, or 255 into each section
as the values for the subnet mask.
as the values for the subnet mask.
NOTE: You cannot enter 127, 254, or 255 into the first section of the format for the
gateway address.
gateway address.
7.
Press the <Log In/Out> button.
NOTE: If you wish to filter access to the machine from the client computers, activate
the IP Filter. The [Filter] screen is located in the same layer as the [TCP/IP Settings]
screen.
the IP Filter. The [Filter] screen is located in the same layer as the [TCP/IP Settings]
screen.
Workstation Setup
This section explains how to change the workstation OS for Solaris, SunOS, and HP-
UX workstations. Refer to the relevant instructions below.
UX workstations. Refer to the relevant instructions below.
Print language/mode/logical printer
A printer name for logical printer should correspond to the print language/mode to be
used for printing, or to the Logical Printer Number which was registered through
CentreWare Internet Services.
used for printing, or to the Logical Printer Number which was registered through
CentreWare Internet Services.
Printer Name
Print Language/Mode/Logical Printer
PS*
PostScript
PSASC/PSA*
PostScript
PSBIN/PSB*
PostScript
PCL
PCL
LP
Print language which was specified on the
touch screen of the machine.
touch screen of the machine.
DUMP/DMP
Dump mode
AUTO/ATO
Auto detection mode
TIFF/TIF
TIFF direct print
TIFF%n
TIFF (%n: Logical Printer Number 1 to 10
which were registered through CentreWare
Internet Services.)
which were registered through CentreWare
Internet Services.)
PS%n*
PostScript (%n: Logical Printer Number 1 to
10 which were registered through
CentreWare Internet Services.)
10 which were registered through
CentreWare Internet Services.)