Xerox C118 User Guide

Use the same steps as IP address setting to enter the subnet mask and gateway 
address.

NOTE: You can enter 000, 128, 192, 224, 240, 248, 252, 254, or 255 into each section 
as the values for the subnet mask.

NOTE: You cannot enter 127, 254, or 255 into the first section of the format for the 
gateway address.

Press the <Log In/Out> button.

NOTE: If you wish to filter access to the machine from the client computers, activate 
the IP Filter. The [Filter] screen is located in the same layer as the [TCP/IP Settings] 
screen.

This section explains how to change the workstation OS for Solaris, SunOS, and HP-
UX workstations. Refer to the relevant instructions below.

Solaris – page 44
SunOS – page 44
HP-UX – page 46

A printer name for logical printer should correspond to the print language/mode to be 
used for printing, or to the Logical Printer Number which was registered through 
CentreWare Internet Services. 

PS*

PostScript

PSASC/PSA*

PostScript

PSBIN/PSB*

PostScript

PCL

PCL

LP

Print language which was specified on the 
touch screen of the machine.

DUMP/DMP

Dump mode

AUTO/ATO

Auto detection mode

TIFF/TIF

TIFF direct print

TIFF%n

TIFF (%n: Logical Printer Number 1 to 10 
which were registered through CentreWare 
Internet Services.)

PS%n*

PostScript (%n: Logical Printer Number 1 to 
10 which were registered through 
CentreWare Internet Services.)