ONKYO TX-SA806 Betriebsanweisung
102
This section explains how to turn Zone 2 on and off, how
to select an input source for Zone 2, and how to adjust
the volume for Zone 2.
to select an input source for Zone 2, and how to adjust
the volume for Zone 2.
Controlling Zone 2 from the AV receiver/AV
amplifier
amplifier
Note:
While Powered Zone 2 is being used, listening modes
that require surround back speakers (6.1/7.1), such as
Dolby Digital EX, DTS-ES, and THX Ultra2 Cinema,
are unavailable.
While Powered Zone 2 is being used, listening modes
that require surround back speakers (6.1/7.1), such as
Dolby Digital EX, DTS-ES, and THX Ultra2 Cinema,
are unavailable.
Controlling Zone 2 with the Remote
Controller
Controller
Note:
To control Zone 2, you must press the remote control-
ler’s [ZONE 2] button first.
To control Zone 2, you must press the remote control-
ler’s [ZONE 2] button first.
Using Zone 2
1
To turn on Zone 2 and select an
input source, press the [ZONE 2]
button repeatedly.
input source, press the [ZONE 2]
button repeatedly.
Alternatively, press the [ZONE 2]
button followed by an input
selector button within 8 seconds.
button followed by an input
selector button within 8 seconds.
Zone 2 turns on, the ZONE 2 indicator
lights up, and the 12V TRIGGER OUT
ZONE 2 goes high (+12 V).
lights up, and the 12V TRIGGER OUT
ZONE 2 goes high (+12 V).
To select AM or FM press the
[TUNER] input selector button repeat-
edly (TX-SR806 only). On the North
American model, you can also select
XM or SIRIUS.
[TUNER] input selector button repeat-
edly (TX-SR806 only). On the North
American model, you can also select
XM or SIRIUS.
To select the same source as that of the
main room, press the [ZONE 2] button
repeatedly until “Z2 Selector: Source”
appears on the display.
main room, press the [ZONE 2] button
repeatedly until “Z2 Selector: Source”
appears on the display.
Note:
You cannot select different AM or FM
radio stations for your main room and
Zone 2. The same AM/FM radio station
will be heard in each room.
You cannot select different AM or FM
radio stations for your main room and
Zone 2. The same AM/FM radio station
will be heard in each room.
2
To turn off Zone 2, press the
[OFF] button.
[OFF] button.
1
1
2
1
Press the [ZONE 2] button, then
point the remote controller at the
AV receiver/AV amplifier and
press the [ON/STANDBY] button.
Zone 2 turns on, the ZONE 2 indicator
lights up, and the 12V TRIGGER OUT
ZONE 2 goes high (+12 V).
point the remote controller at the
AV receiver/AV amplifier and
press the [ON/STANDBY] button.
Zone 2 turns on, the ZONE 2 indicator
lights up, and the 12V TRIGGER OUT
ZONE 2 goes high (+12 V).
2
To select an input source for
Zone 2, press the [ZONE 2] but-
ton, followed by an INPUT
SELECTOR button.
To select AM or FM press the [TUNER]
INPUT SELECTOR button repeatedly.
On the North American model, you can
also select XM or SIRIUS.
Zone 2, press the [ZONE 2] but-
ton, followed by an INPUT
SELECTOR button.
To select AM or FM press the [TUNER]
INPUT SELECTOR button repeatedly.
On the North American model, you can
also select XM or SIRIUS.
Note:
You cannot select different AM or FM
radio stations for your main room and
Zone 2. The same AM/FM radio station
will be heard in each room.
You cannot select different AM or FM
radio stations for your main room and
Zone 2. The same AM/FM radio station
will be heard in each room.
3
To turn off Zone 2, press the
[ZONE 2] button, followed by the
[ON/STANDBY] button.
[ZONE 2] button, followed by the
[ON/STANDBY] button.
INPUT
SELECTOR
ON/
STANDBY
ZONE2
TX-SR806_En.book Page 102 Monday, August 4, 2008 10:25 AM